Chrysler 2004 Town and Country Bedienungshandbuch

Town & CountryChrysler Group LLC OWNER’S MANUAL 2014 Town & Country14Y531-126-AA First Edition Printed in U.S.A.

WARNING!In a collision, an unrestrained child can become aprojectile inside the vehicle. The force required tohold even an infant on your lap could be

Summary Of Recommendations For Restraining Children In VehiclesChild Size, Height, Weight Or Age Recommended Type Of Child RestraintInfants and Toddle

Infants And Child RestraintsSafety experts recommend that children ride rearward-facing in the vehicle until they are two years old or untilthey reach

have outgrown the rear-facing weight or height limit oftheir rear-facing convertible child seat. Children shouldremain in a forward-facing child seat

Children Too Large For Booster SeatsChildren who are large enough to wear the shoulder beltcomfortably, and whose legs are long enough to bendover the

Recommendations For Attaching Child RestraintsRestraint TypeCombinedWeight of theChild + ChildRestraintUse any attachment method shown with an “X” Bel

Lower Anchors And Tethers For Children (LATCH)Restraint SystemYour vehicle is equipped with the child restraint anchor-age system called LATCH, which

LATCH Positions For Installing Child Restraints InThis VehicleSecond Row Captains Chairs• Lower Anchorage Symbol 2 anchorages per seat-ing position•To

Child Restraint LATCH PositionsWhat is the weight limit (child’sweight + weight of the child restraint)for using the LATCH anchorage sys-tem to attach

Can two child restraints be attachedusing a common lower LATCH an-chorage?No Never “share” a LATCH anchoragewith two or more child restraints. Ifthe c

THINGS TO KNOW BEFORE STARTING YOUR VEHICLECONTENTS䡵 A WORD ABOUT YOUR KEYS ...13▫ Wireless Ignition Node (WIN) ...13▫ KeyFob...

Locating The LATCH AnchoragesThe lower anchorages are round bars that arefound at the rear of the seat cushion where itmeets the seatback. They are ju

Locating The LATCH AnchoragesIn addition, there are tether strap anchors lo-cated behind each rear seatback, near to the floor.LATCH Anchorages (Third

LATCH-compatible child restraint systems will beequipped with a rigid bar or a flexible strap on each side.Each will have a hook or connector to attac

Always follow the directions of the child restraintmanufacturer when installing your child restraint. Notall child restraint systems will be installed

6. Tighten all of the straps as you push the child restraintrearward and downward into the seat. Remove slackin the straps according to the child rest

WARNING! (Continued)• Child restraint anchorages are designed to with-stand only those loads imposed by correctly-fittedchild restraints. Under no cir

Lap/Shoulder Belt Systems for Installing ChildRestraints in this VehicleSecond Row Captains ChairSecond Row Bench114 THINGS TO KNOW BEFORE STARTING YO

Lap/Shoulder Belt SystemsWhat is the weight limit (child’sweight + weight of the child restraint)for using the Tether Anchor with theseat belt to atta

Installing A Child Restraint With A SwitchableAutomatic Locking Retractor (ALR)1. Place the child seat in the center of the seatingposition. For some

strap. See the section “Installing Child RestraintsUsing the Top Tether Anchorage” for directions toattach a tether anchor.9. Test that the child rest

▫ Sound Horn With Remote Lock ...25▫ Using The Panic Alarm ...26▫ Power Open/Close Power Liftgate — IfEquipped ...

strap. Refer to “Installing Child Restraints Using TheTop Tether Anchorage” for directions to attach a tetheranchor.6. Test that the child restraint i

2. Route the tether strap to provide the most direct pathfor the strap between the anchor and the child seat. Ifyour vehicle is equipped with adjustab

4. Remove slack in the tether strap according to the childrestraint manufacturer’s instructions.WARNING!• An incorrectly anchored tether strap could l

COMMERCIAL CARGO VEHICLES (NO FACTORYINSTALLED REAR SEATS) — IF EQUIPPEDCommercial cargo vehicles are not designed for use as afamily vehicle and are

Restraining Infants And Small Children InCommercial Cargo VehiclesThere are different sizes and types of restraints forchildren from newborn size to t

ENGINE BREAK-IN RECOMMENDATIONSA long break-in period is not required for the engine anddrivetrain (transmission and axle) in your vehicle.Drive moder

SAFETY TIPSTransporting PassengersNEVER TRANSPORT PASSENGERS IN THE CARGOAREA.WARNING!• Do not leave children or animals inside parkedvehicles in hot

WARNING! (Continued)• If you are required to drive with the trunk/liftgate/rear doors open, make sure that all windows areclosed and the climate contr

Air Bag Warning LightThe light should come on and remain on forfour to eight seconds as a bulb check when theignition switch is first turned ON. If th

WARNING! (Continued)• Never place or install floor mats or other floorcoverings in the vehicle that cannot be properlysecured to prevent them from mov

䡵 LIFTGATE ...58▫ Power Liftgate — If Equipped ...59䡵 OCCUPANT RESTRAINTS ...62▫ Lap/Shoulder Belts ..

Periodic Safety Checks You Should Make OutsideThe VehicleTiresExamine tires for excessive tread wear and uneven wearpatterns. Check for stones, nails,

UNDERSTANDING THE FEATURES OF YOUR VEHICLECONTENTS䡵 MIRRORS ...136▫ Inside Day/Night Mirror — If Equipped . . . .136▫ Automat

▫ Phone Call Features ...161▫ Uconnect® Phone Features ...164▫ Advanced Phone Connectivity ...169▫ Things You Shou

▫ Setting Memory Positions And Linking RKETransmitter To Memory ...221▫ Easy Entry/Exit Seat (Available With MemorySeat ONLY) ...

▫ Rain Sensing Wipers — If Equipped ...237䡵 TILT/TELESCOPING STEERING COLUMN . . .239䡵HEATED STEERING WHEEL — IF EQUIPPED . .240䡵 ADJUSTABLE PEDA

䡵 OVERHEAD CONSOLES ...260▫ Front Overhead Console...260▫ Courtesy/Interior Lighting ...261▫ Sunglass Storage (

▫ Ignition Off Operation ...277䡵 ELECTRICAL POWER OUTLETS —IF EQUIPPED ...277䡵 POWER INVERTER — IF EQUIPPED...

▫ Rechargeable Flashlight ...301䡵 REAR WINDOW FEATURES ...303▫ Rear Window Defroster ...303䡵 LOAD LEVELING SYST

MIRRORSInside Day/Night Mirror — If EquippedA two-point pivot system allows for horizontal andvertical adjustment of the mirror. Adjust the mirror toc

Automatic Dimming Mirror — If EquippedThis mirror automatically adjusts for headlight glarefrom vehicles behind you. You can turn the feature on oroff

䡵 SAFETY TIPS ...124▫ Transporting Passengers ...124▫ Exhaust Gas ...124▫ Safety Checks You

Outside MirrorsTo receive maximum benefit, adjust the outside mirror(s)to center on the adjacent lane of traffic with a slightoverlap of the view obta

Power Mirrors — If EquippedThe power mirror controls are located on the driver-sidedoor trim panel.The power mirror controls consist of mirror select

Heated Mirrors — If EquippedThese mirrors are heated to melt frost or ice. Thisfeature can be activated whenever you turn on therear window defroster

Resetting the Power Folding Outside MirrorsYou may need to reset the power folding mirrors if thefollowing occurs:• The mirrors are accidentally block

BLIND SPOT MONITORING (BSM) — IFEQUIPPEDThe Blind Spot Monitoring (BSM) system uses two radar-based sensors, located inside the rear bumper fascia, to

Automatic Transmission VehiclesThe BSM system sensors operate when the vehicle is inany forward gear or REVERSE and enters stand-by modewhen the vehic

The BSM system notifies the driver of objects in thedetection zones by illuminating the BSM warning lightlocated in the outside mirrors in addition to

Entering From The SideVehicles that move into your adjacent lanes from eitherside of the vehicle.Entering From The RearVehicles that come up from behi

Overtaking TrafficIf you pass another vehicle slowly (with a relative speedof less than 15 mph (24 km/h) and the vehicle remains inthe blind spot for

The BSM system is designed not to issue an alert onstationary objects such as guardrails, posts, walls, foliage,berms, etc. However, occasionally the

A WORD ABOUT YOUR KEYSYour vehicle is equipped with a keyless ignition system.This system consists of a Key Fob with Remote KeylessEntry (RKE) transmi

WARNING!The Blind Spot Monitoring system is only an aid tohelp detect objects in the blind spot zones. The BSM(Continued)WARNING! (Continued)system is

RCP monitors the rear detection zones on both sides ofthe vehicle, for objects that are moving toward the side ofthe vehicle with a minimum speed of a

Modes Of OperationModes Of Operation With EVICThree selectable modes of operation are available in theElectronic Vehicle Information Center (EVIC). Re

When the system is in RCP, the system shall respond withboth visual and audible alerts when a detected object ispresent. Whenever an audible alert is

Uconnect® Phone allows you to transfer calls betweenthe system and your mobile phone as you enter or exityour vehicle and enables you to mute the syst

Voice Command ButtonActual button location may vary with the ra-dio. The individual buttons are described in the“Operation” section.The Uconnect® Phon

part of the command when you are asked for it. Forexample, you can use the compound form voice com-mand “Phonebook New Entry,” or you can break thecom

The following are general phone to Uconnect® Phonepairing instructions:1. Press thebutton to begin.2. After the “Ready” prompt and the following beep,

• The system will prompt you to say the number youwant to call.• For example, you can say “234–567–8901.”• The Uconnect® Phone will confirm the phone

• Automatic download and update, if supported, beginsas soon as the Bluetooth® wireless phone connection ismade to the Uconnect® Phone, for example, a

Key FobThe Key Fob operates the ignition switch. Insert thesquare end of the Key Fob into the ignition switch locatedon the instrument panel and rotat

• When prompted, enter the number designation (e.g.,“Home,” “Work,” “Mobile,” or “Other”). This willallow you to store multiple numbers for each phone

After you are finished editing an entry in the phonebook,you will be given the opportunity to edit another entry inthe phonebook, call the number you

Delete/Erase “All” Uconnect® Phonebook Entries• Press the button to begin.• After the “Ready” prompt and the following beep, say“Phonebook Erase All.”

Phone Call FeaturesThe following features can be accessed through theUconnect® Phone if the feature(s) are available on yourmobile service plan. For e

in progress. To go back to the first call, refer to “TogglingBetween Calls” in this section. To combine two calls, referto “Conference Call” in this s

Call TerminationTo end a call in progress, momentarily press the but-ton. Only the active call(s) will be terminated and if thereis a call on hold, it

Uconnect® Phone FeaturesLanguage SelectionTo change the language that the Uconnect® Phone isusing:• Press thebutton to begin.• After the “Ready” promp

NOTE:• The emergency number dialed is based on the countrywhere the vehicle is purchased (911 for the U.S. andCanada and 060 for Mexico). The number d

NOTE: You should program the desired Towing Assis-tance phone number using the Voice Command system.To do this, press the button and say “Setup,” foll

“Send,” is also to be used for navigating through anautomated customer service center menu structure, andto leave a number on a pager.You can also sen

Removing Key Fob From IgnitionPlace the shift lever in PARK. Turn the Key Fob to theOFF position and then remove the Key Fob.NOTE: Power window switch

Phone And Network Status IndicatorsIf available on the radio and/or on a premium displaysuch as the instrument panel cluster, and supported byyour mob

To un-mute the Uconnect® Phone:• Press thebutton.• Following the beep, say “Mute off.”Advanced Phone ConnectivityTransfer Call To And From Mobile Phon

Select Another Mobile PhoneThis feature allows you to select and start using anotherphone paired with the Uconnect® Phone.• Press thebutton to begin.•

Voice TrainingFor users experiencing difficulty with the system recog-nizing their voice commands or numbers, the Uconnect®Phone Voice Training featur

Voice Command• For best performance, adjust the rearview mirror toprovide at least ½ inch (1 cm) gap between theoverhead console (if equipped) and the

• Numbers must be spoken in single digits. “800” mustbe spoken “eight-zero-zero” not “eight hundred.”• You can say “O” (letter “O”) for “0” (zero).• E

Voice Text ReplyUconnect® Phone can read or send new messages onyour phone.Read Messages:If you receive a new text message while your phone isconnecte

List of Preset Messages:1. Yes.2. No.3. Where are you?4. I need more direction.5. L O L.6. Why?7. I love you.8. Call me.9. Call me later.10. Thanks.11

Turn Voice Text Reply Incoming AnnouncementON/OFFTurning the Voice Text Reply Incoming AnnouncementOFF will stop the system from announcing the newinc

3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177

CAUTION!An unlocked car is an invitation to thieves. Alwaysremove the Key Fob from the ignition and lock alldoors when leaving the vehicle unattended.

178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179

Voice CommandsPrimary Alternate (s)zeroonetwothreefourfivesixseveneightninestar (*)plus (+)pound (#)add locationVoice CommandsPrimary Alternate (s)all

Voice CommandsPrimary Alternate (s)helphomelanguagelist nameslist phonesmobilemutemute offnew entrynootherpair a phonephone pairing pairingphonebook p

General InformationThis device complies with Part 15 of the FCC rules andRSS 210 of Industry Canada. Operation is subject to thefollowing conditions:•

WARNING!Any voice commanded system should be used onlyin safe driving conditions following all applicablelaws, including laws regarding phone use. You

To hear the first available Menu, press the Voice Com-mandbutton and say “Help” or “Main Menu.”CommandsThe Voice Command system understands two types

Radio AMTo switch to the AM band, say “AM” or “Radio AM.” Inthis mode, you may say the following commands:• “Frequency #” (to change the frequency)• “

Disc ModeTo switch to the disc mode, say “Disc.” In this mode, youmay say the following commands:• “Track” (#) (to change the track)• “Next Track” (to

– “Continue” (to continue recording)– “Delete” (to delete the recording)• “Play Memos” (to play previously recorded memos) —During the playback you ma

the bulb check, it indicates that someone used an invalidKey Fob to start the engine. Either of these conditions willresult in the engine being shut o

Voice TrainingFor users experiencing difficulty with the system recog-nizing their voice commands or numbers the Uconnect®Voice “Voice Training” featu

Power Seats — If EquippedSome models may be equipped with eight-way powerseats for the driver and front passenger. The power seatswitches are located

WARNING!• Adjusting a seat while driving may be dangerous.Moving a seat while driving could result in loss ofcontrol which could cause a collision and

Tilting The Seat Up Or DownThe angle of the seat cushion can be adjusted in fourdirections. Pull upward or push downward on the frontor rear of the se

CAUTION!Do not place any article under a power seat orimpede its ability to move as it may cause damage tothe seat controls. Seat travel may become li

Heated Seats — If EquippedOn some models, the front and rear seats may beequipped with heaters located in the seat cushions.WARNING!• Persons who are

You can choose from HIGH, LOW or OFF heat settings.Amber indicator lights in each switch indicate the level ofheat in use. Two indicator lights will i

You can choose from HIGH, LOW or OFF heat settings.Amber indicator lights in each switch indicate the level ofheat in use. Two indicator lights will i

While sitting in the seat, pull up on the handle and slidethe seat forward or rearward. Release the bar once youhave reached the desired position. The

To recline, lean forward slightly, lift the lever, then pushback to the desired position and release the lever. Leanforward and lift the lever to retu

VEHICLES SOLD IN CANADAWith respect to any Vehicles Sold in Canada, the name ChryslerGroup LLC shall be deemed to be deleted and the name ChryslerCana

At the time of purchase, the original owner is providedwith a four-digit Personal Identification Number (PIN).Keep the PIN in a secure location. This

When AHRs deploy during a rear impact, the front halfof the head restraint extends forward to minimize the gapbetween the back of the occupant’s head

NOTE:• The head restraints should only be removed by quali-fied technicians, for service purposes only. If either ofthe head restraints require remova

• In the event of deployment of an Active Head Re-straint, refer to “Occupant Restraints/Resetting ActiveHead Restraints (AHR)” in “Things To Know Bef

Head Restraints — Second Row BenchIf your vehicle is equipped with a second row bench seat,the head restraints are not adjustable.Head Restraints — Th

NOTE: Seat will not stow in the storage bin unless thearmrests are raised.4. Slide the storage bin locking mechanism to the“LOCK” position and then pu

The seat will automatically tumble into position for easystorage.Non-Adjustable Head Restraint Automatic Folding Seatback3UNDERSTANDING THE FEATURES O

6. Push the seat into the storage bin.7. Close the storage bin cover.Tumbled Second Row SeatSeat In Storage Bin204 UNDERSTANDING THE FEATURES OF YOUR

CAUTION!The storage bin cover must be locked and flat toavoid damage from contact with the front seat tracks,which have minimal clearance to the cover

WARNING! (Continued)• Sitting in a seat with the head restraint in itslowered position could result in serious injury ordeath in a collision. Always m

3. Pull up on the seatback recliner lever on the outboardside of the seat to fold head rest and seatback andtumble seat forward.Easy Entry Second RowT

power liftgate are disabled. The Vehicle Security Alarmprovides both audible and visible signals, for the firstthree minutes, the headlights will turn

The seat will automatically fold into position for easyentry into the third row.WARNING!In the event of a collision you could be injured if theseat is

WARNING!• Adjusting a seat while driving may be dangerous.Moving a seat while driving could result in loss ofcontrol which could cause a collision and

Fold-FlatTo fold the seat, lift the recliner lever to the full upwardposition and push the seatback forward until it rests onthe seat cushion.Easy Ent

For passengers seated in the third row, there is a pullstrap located on the outboard side of the seat near thebottom of the seat back. Third row passe

Second Row Bench Seat — If EquippedWhile the bench seat does not stow in the floor, it isremovable for added cargo space.Release levers are located on

To reinstall the seat, align the seat into the detent positionson the floor. Squeeze the release handle and rotate upwarduntil the lock indicator butt

NOTE: Lower the head restraint by pulling on therelease strap marked “1” located on the outboard side ofthe head restraint.The switch is only function

NOTE:• Disconnect the center shoulder belt from the smallbuckle and lower the head restraints before attemptingto fold/stow the power third row seats.

Manually Folding Third Row Seats — If Equipped1. Lower the center head restraint down to the seatbackby pushing the button on the guide and pushing th

3. Pull release strap marked “2” located on the rear of theseat to lower the seatback.4. Pull release strap marked “3” to release the anchors.Release

• Push the LOCK button on the exterior Passive EntryDoor Handle with a valid Key Fob available in thesame exterior zone (refer to ⬙Keyless Enter-N-Go™

5. Pull release strap marked “4” and tumble the seatrearward into the storage bin.Release Strap “4”Stowed Third Row Seat218 UNDERSTANDING THE FEATURES

To Unfold Third Row Seats1. Pull up on the assist strap to lift the seat out of thestorage bin and push the seat forward until theanchors latch.2. Pul

Plastic Grocery Bag Retainer HooksRetainer hooks which will hold plastic grocery baghandles are built into the seatbacks of all rear seats andsome fro

Setting Memory Positions And Linking RKETransmitter To MemoryNOTE: Each time the SET (S) button and a numberedbutton (1 or 2) is pressed, you erase th

11. Repeat the above steps to set the next Memoryposition using the other numbered Memory button orto link another RKE transmitter to memory.Memory Po

To disable another RKE transmitter linked to eitherMemory Position, repeat Steps 1 to 5 for each RKEtransmitter.NOTE: Once programmed, all RKE transmi

Each stored memory setting will have an associated EasyEntry and Easy Exit Position.NOTE: The Easy Entry/Easy Exit feature can be enabledor disabled t

Use the hood prop rod to secure the hood in the openposition.CAUTION!To prevent possible damage, do not slam the hood toclose it. Lower the hood until

LIGHTSHeadlight SwitchThe headlight switch is located on the left side of theinstrument panel. The switch controls the operation ofthe headlights, par

Automatic Headlights — If EquippedThis system automatically turns your headlights on or offbased on ambient light levels. To turn the system on, turnt

• When the Vehicle Security Alarm is armed, the interiorpower door lock switches will not unlock the doors.The Vehicle Security Alarm is designed to p

headlights or parking lights are turned back on or theignition switch is turned ON, the delay will be cancelled.When exiting the vehicle the driver ca

Front Fog Lights — If EquippedTo activate the front fog lights, turn on theparking lights or the low beam headlights andpush in the headlight switch c

Interior Lighting OnRotate the left dimmer control completely upward to thesecond detent (extreme top position) to turn on theinterior lights. The int

The Halo control switch is located to the right of thedimmer switch.To activate the Halo lights, rotate the Haloswitch control upward or downward to i

The multifunction lever controls the:• Turn Signals• Headlight Beams Low/High• Flash-To-Pass (Optical Horn)• Front and Rear Wipers — Washer FunctionsT

Flash-To-PassYou can signal another vehicle with your headlights bylightly pulling the multifunction lever toward you. Thiswill cause the headlights t

3. Push the multifunction lever away from you to switchthe headlights to the high beam position. Refer to“Multifunction Lever” in this section for fur

WINDSHIELD WIPER AND WASHERSThe wipers and washers are operated by a switch withinthe multifunction lever. Rotate the end of the multifunc-tion lever

Intermittent Wiper SystemUse the intermittent wiper when weather conditionsmake a single wiping cycle with a variable pause be-tween cycles desirable.

Rear Wiper And WasherRotating the rotary ring to the first detent activates therear intermittent wipers. To activate the washers, rotatethe rotary rin

The lights will fade to off after approximately 30 seconds,or they will immediately fade to off once the ignitionswitch is turned to ON/RUN from the O

• The Rain Sensing feature can be turned on and offthrough the EVIC (if equipped). Refer to “ElectronicVehicle Information Center (EVIC)/Personal Sett

TILT/TELESCOPING STEERING COLUMNThis feature allows you to tilt the steering columnupward or downward. It also allows you to lengthen orshorten the st

HEATED STEERING WHEEL — IF EQUIPPEDThe steering wheel contains a heating element that helpswarm your hands in cold weather. The heated steeringwheel h

Vehicles Equipped With Remote StartOn models that are equipped with remote start, theheated steering wheel can be programed to come onduring a remote

Press the switch forward to move the pedals forward(toward the front of the vehicle).Press the switch rearward to move the pedals rearward(toward the

• For vehicles equipped with Driver Memory Seat, youcan use your Remote Keyless Entry (RKE) transmitteror the memory switch on the driver’s door trim

NOTE: In order to ensure proper operation, the Elec-tronic Speed Control System has been designed to shutdown if multiple Speed Control functions are

WARNING!Leaving the Electronic Speed Control system onwhen not in use is dangerous. You could accidentallyset the system or cause it to go faster than

The speed increment shown is dependant on the speed ofU.S. (mph) or Metric (km/h) units:U.S. Speed (mph)• Pressing the RES (+) button once will result

Metric Speed (km/h)• Pressing the SET (-) button once will result in a 2 km/hdecrease in set speed. Each subsequent tap of thebutton results in a decr

Two RKE transmitters may be supplied with the vehicle.Vehicles built without the powered options will beequipped from the factory with three-button RK

PARKSENSE® REAR PARK ASSIST — IFEQUIPPEDThe ParkSense® Rear Park Assist system provides visualand audible indications of the distance between the rear

ParkSense® Warning DisplayThe ParkSense® Warning screen will only be displayed ifSound and Display is selected from the Customer-Programmable Features

ParkSense® DisplayWhen the vehicle is in REVERSE, the warning displaywill turn ON indicating the system status.The system will indicate a detected obs

Slow Tone Fast Tone3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251

The vehicle is close to the obstacle when the EVIC displayshows one flashing arc and sounds a continuous tone.The following chart shows the warning al

WARNING ALERTSRear Distance(in/cm)Greater than79 in (200 cm)79-39 in(200-100 cm)39-25 in(100-65 cm)25-12 in(65-30 cm)Less than12 in (30 cm)Audible Ale

shift lever is moved to REVERSE and the system isdisabled, the EVIC will display the “PARK ASSIST SYS-TEM OFF” message for as long as the vehicle is i

• Jackhammers, large trucks, and other vibrations couldaffect the performance of ParkSense®.• When you turn ParkSense® OFF, the instrument clus-ter wi

CAUTION!• ParkSense® is only a parking aid and it is unable torecognize every obstacle, including small obstacles.Parking curbs might be temporarily d

WARNING! (Continued)• Before using ParkSense®, it is strongly recom-mended that the ball mount and hitch ball assem-bly is disconnected from the vehic

(optional), power sliding doors, Remote Start feature(optional). Some features can be programmed to thecustomers preferences. For example, flash headl

When displayed, static grid lines will illustrate the widthof the vehicle while a dashed center-line will indicate thecenter of the vehicle to assist

CAUTION! (Continued)• To avoid vehicle damage, the vehicle must bedriven slowly when using ParkView® to be able tostop in time when an obstacle is see

OVERHEAD CONSOLESFront Overhead ConsoleTwo versions of the overhead console are available. Thebase front overhead console model featured fixed incan-d

Courtesy/Interior LightingAt the forward end of the console are two courtesy lights(standard dome light has two buttons). The lights turn onwhen a fro

From this position, the door can be fully closed or, byrotating upward about 3/4 of the way and releasing,positioned for conversation mirror use.NOTE:

Rear Courtesy/Reading Lights — If EquippedThe overhead console has two sets of courtesy lights. Thelights turn on when a front door, a sliding door or

Rear Console Halo LightingThe rear overhead console has recessed halo lightingaround the perimeter of the console base. This featureprovides additiona

NOTE: HomeLink® is disabled when the Vehicle Secu-rity Alarm is active.HomeLink® Buttons/Overhead Consoles HomeLink® Buttons/Sunvisor/Headliner3UNDERS

Before You Begin Programming HomeLink®Be sure that your vehicle is parked outside of the garagebefore you begin programming.For more efficient program

1. Cycle the ignition to the ON/RUN position.2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)away from the HomeLink® button you wish to pro-gr

• For vehicles not equipped with the EVIC, the RemoteUnlock feature can be enabled or disabled by perform-ing the following steps:1. Perform this oper

Firmly press and release the “LEARN” or “TRAIN-ING” button. On some garage door openers/devicesthere may be a light that blinks when the garage doorop

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)away from the HomeLink® button you wish to pro-gram while keeping the HomeLink® indicator ligh

Canadian/Gate Operator ProgrammingFor programming transmitters in Canada/United Statesthat require the transmitter signals to “time-out” afterseveral

If you unplugged the garage door opener/device forprogramming, plug it back in at this time.Reprogramming A Single HomeLink® ButtonTo reprogram a chan

Troubleshooting TipsIf you are having trouble programming HomeLink®,here are some of the most common solutions:• Replace the battery in the original h

WARNING! (Continued)use a garage door opener without these safety fea-tures. Call toll-free 1–800–355–3515 or, on the Internetat www.HomeLink.com for

POWER SUNROOF — IF EQUIPPEDThe power sunroof switch is located between the sunvisors on the overhead console.WARNING!• Never leave children unattended

WARNING! (Continued)• Do not allow small children to operate the sunroof.Never allow your fingers, other body parts, or anyobject, to project through

Pinch Protect FeatureThis feature will detect an obstruction in the opening ofthe sunroof during Express Close operation. If an ob-struction in the pa

Sunroof MaintenanceUse only a non-abrasive cleaner and a soft cloth to cleanthe glass panel.Ignition Off OperationFor Vehicles Not Equipped With The E

• For vehicles not equipped with the EVIC, perform thefollowing steps:1. Perform this operation while standing outside thevehicle.2. Press the LOCK bu

NOTE: To ensure proper operation a MOPAR® cigarknob and element must be used.CAUTION!• Do not exceed the maximum power of 160 Watts(13 Amps) at 12 Vol

One outlet in the removable floor console (if equipped)shares a fuse with the lower outlet in the instrumentpanel and is also connected to the battery

The outlet in the rear quarter panel near the liftgate andthe upper outlet in the instrument panel are both con-trolled by the ignition switch. Each o

WARNING!To avoid serious injury or death:• Only devices designed for use in this type of outletshould be inserted into any 12 Volt outlet.• Do not tou

CAUTION! (Continued)• Power outlets are designed for accessory plugsonly. Do not hang any type of accessory or acces-sory bracket from the plug. Impro

This outlet can power cellular phones, electronics andother low power devices requiring power up to150 Watts. Certain high-end video games, such as Pl

Instrument Panel CupholdersThe instrument panel cupholders are located in a pull-outdrawer just above the lower storage bin.Pull the drawer out firmly

For rear passengers two cupholders are located in thepull-out drawer, located in the back of the Super Console.Pull the drawer out to the first positi

Interior Bottle HoldersThere are four bottle holders located in the interior. Onebottle holder is molded into each front interior door trimpanels, and

Smoker’s Package Kit — If EquippedWith the optional authorized dealer-installed Smoker’sPackage Kit, a removable ash receiver is inserted into oneof t

NOTE:• When you turn off the Panic Alarm by pressing thePANIC button a second time, you may have to movecloser to the vehicle due to the Radio Frequen

Lower Glove CompartmentTo open the lower compartment pull out on the releasehandle.Door Trim Panel StorageFront Door StorageBoth interior front door p

Umbrella HolderAn umbrella holder has been conveniently molded intothe left front door entry scuff molding.Driver’s Seatback Storage1 — Bag Holder2 —

Second Row Floor Storage BinsThe area below the floor covers, located in front of thesecond row seats, is available for storage.Pull up on the storage

WARNING! (Continued)• Do not operate the storage bin covers while thevehicle is in motion.• Do not use a storage bin latch as a tie down.Storage Bin S

Seat Storage Bin Cover Emergency Release LeverAs a security measure, the Seat Storage Bin Cover has anEmergency Release Lever built into the latching

Coat HooksCoat hooks are located along the headliner for the secondand third row seating positions. The coat hook load limitis 10 lbs (4.5 kg). Exceed

NOTE: With all rear seats stowed or removed,4x8footsheets of building material will fit on the vehicle floorwith the liftgate closed. The front seats

• The cupholders are removable to access a large storagebin.• The basic console is removable from the vehicle foradditional floor space by removing th

Premium Console — If EquippedThe three-compartment console with sliding storage bin,sliding upper tray with storage and large console storagebin offer

Position 2 shows the raised storage tray revealing a largestorage area below.Console Position 1Console Position 23UNDERSTANDING THE FEATURES OF YOUR V

TABLE OF CONTENTSSECTION PAGE1INTRODUCTION ...32THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

If the vehicle is locked and the Vehicle Security Alarm isarmed, pressing the LEFT Power Sliding Door buttontwice unlocks the power sliding door and d

Dual Storage BinsPosition 3 shows the top portion of the console in arearward position. This is accomplished by lifting theupper most latch at the fro

To Remove The Premium Floor Console1. Pull up on the bottom release handle in the front of theconsole.2. Lift the rear of the console up several inche

The super console tambour doors are opened by pushingdown on the finger tabs and sliding the door. The fronttambour door slides forward, the rear tamb

NOTE: The front cupholder light ring and pass throughlighting is controlled by a dimming switch located on theinstrument panel, refer to “Lights” in “

Press in on the flashlight to release it. To operate the flashlight, press the switch once for high,twice for low, and a third time to return to off.P

REAR WINDOW FEATURESRear Window DefrosterThe rear window defroster button is located onthe climate control (Mode) knob. Press this buttonto turn on th

LOAD LEVELING SYSTEM — IF EQUIPPEDThe automatic load leveling system will provide a level-riding vehicle under most passenger and cargo loadingconditi

not exceed 150 lbs (68 kg), and should be uniformlydistributed over the luggage rack crossbars.NOTE:• Crossbars are error-proofed and cannot be deploy

Bend the crossbar supports at each end, taking care tokeep hand clear of pivoting joint. Slide the thumb screwdown.Then, position the crossbars across

Make sure the directional arrows on the crossbars alignwith the directional arrows on the side rails. Set thecrossbars into the deployed positions.Onc

2. Press and hold the UNLOCK button on a programmedRKE transmitter for at least 4 seconds, but no longerthan 10 seconds. Then, press and hold the LOCK

Stowing The CrossbarsReverse the procedure to stow the crossbars, again,taking care to keep hand clear of pivoting joint. Crossbarsare identical and c

CAUTION!• Check deployed crossbars frequently and retightenthumb screws as necessary.•To avoid damage to the roof rack and vehicle, do notexceed the m

CAUTION! (Continued)• Long loads which extend over the windshield, suchas wood panels or surfboards, or loads with largefrontal area should be secured

Gently pull up on the tab to raise the sun screen.Continue pulling the sun screen until the tab is near thetop of the window.Once the screen is comple

UNDERSTANDING YOUR INSTRUMENT PANELCONTENTS䡵 INSTRUMENT PANEL FEATURES ...318䡵 INSTRUMENT CLUSTER — BASE ...319䡵 INSTRUMENT CLUSTER — PR

▫ Units ...349▫Vehicle Info (Customer Information Features) . . .349▫ Messages # ...350▫Keyless Ente

▫ Operating Instructions (Uconnect® Phone) — IfEquipped ...386䡵 SETTING THE ANALOG CLOCK ...387䡵iPod®/USB/MP3 CONTROL

▫ VES™ Remote Control — If Equipped ...412▫ Blu-ray™ Player Remote Control — IfEquipped ...415▫ Remote Control Storage ...

䡵 CD/DVD/Blu-ray™ Disc MAINTENANCE . . . .442䡵RADIO OPERATION AND MOBILE PHONES . . .443䡵 CLIMATE CONTROLS ...443▫ Manual Heating And

2. Insert the tip of the emergency key or a #2 flat bladescrewdriver into the slot and gently pry the two halvesof the RKE transmitter apart. Make sur

INSTRUMENT PANEL FEATURES1 — Air Vents 5 — Analog Clock 9 — DVD – If Equipped 13 — Ignition Switch2 — Instrument Cluster 6 — Upper Glove Compartment 1

INSTRUMENT CLUSTER — BASE4UNDERSTANDING YOUR INSTRUMENT PANEL 319

INSTRUMENT CLUSTER — PREMIUM320 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER DESCRIPTIONS1. TachometerThis gauge measures engine revolutions per minute(RPM x 1000). Before the pointer reaches the red area,eas

U.S. Federal regulations require that upon transfer ofvehicle ownership, the seller certify to the purchaser thecorrect mileage that the vehicle has b

NOTE: Some of the above warnings will be displayed inthe Electronic Vehicle Information Center Display Arealocated in the instrument cluster.Refer to

position. To turn off the message temporarily, press andrelease the STEP button on the steering wheel. To resetthe oil change indicator system (after

8.Tire Pressure Monitoring Telltale Light — If EquippedEach tire, including the spare (if provided),should be checked monthly when cold andinflated to

of reasons, including the installation of replacement oralternate tires or wheels on the vehicle that prevent theTPMS from functioning properly. Alway

CAUTION!Prolonged driving with the Malfunction IndicatorLight (MIL) on could cause damage to the enginecontrol system. It also could affect fuel econo

3. Remove and replace the battery. When replacing thebattery, match the + sign on the battery to the + sign onthe inside of the battery clip, located

NOTE:• The “ESC Off Indicator Light” and the “ESCActivation/Malfunction Indicator Light” come onmomentarily each time the ignition switch is turnedto

15. Air Bag Warning LightThis light will turn on for four to eight secondsas a bulb check when the ignition switch is firstturned to ON/RUN. If the li

18. Brake Warning LightThis light monitors various brake functions,including brake fluid level and parking brakeapplication. If the brake light turns

WARNING!Driving a vehicle with the red brake light on isdangerous. Part of the brake system may have failed.It will take longer to stop the vehicle. Y

20. Temperature GaugeThe temperature gauge shows engine coolant tempera-ture. Any reading within the normal range indicates thatthe engine cooling sys

22. Charging System LightThis light shows the status of the electrical chargingsystem. The light should come on when the ignitionswitch is first turne

25. Electronic Throttle Control (ETC) LightThis light informs you of a problem with theElectronic Throttle Control (ETC) system. Thelight will come on

CAUTION!Continuous driving with the Transmission Tempera-ture Warning Light illuminated will eventually causesevere transmission damage or transmissio

• Fuel Economy• Vehicle Speed• Trip Info• Tire PSI• Vehicle Info• Messages• Units• System Setup (Personal Settings)• Turn Menu OffThe system allows th

DOWN ButtonPress and release the DOWN button to scrolldownward through the main menus andsub-menus.SELECT ButtonThe SELECT button allows access to inf

If your RKE transmitter fails to operate from a normaldistance, check for these two conditions:1. A weak battery in the transmitter. The expected life

The main display area will normally display the mainmenu or the screens of a selected feature of the mainmenu. The main display area also displays ⬙po

The Reconfigurable Telltales section is divided into thewhite telltales area on the right, amber telltales in themiddle, and red telltales on the left

RKE Battery LowService Keyless SystemLow Washer FluidOil Change RequiredCheck GascapLeft Front Turn Signal Light OutLeft Rear Turn Signal Light OutRig

EVIC White Telltale LightsThis area will show reconfigurable white caution tell-tales. These telltales include:• Electronic Range Select (ERS) StatusT

• Loose Gascap IndicatorIf the vehicle diagnostic system determinesthat the fuel filler cap is loose, improperlyinstalled, or damaged, a loose gascap

• Charging System LightThis light shows the status of the electrical charg-ing system. The light should come on when theignition switch is first turne

• Engine Temperature Warning LightThis light warns of an overheated engine condi-tion. As temperatures rise and the gauge ap-proaches H, this indicato

WARNING!If you continue operating the vehicle when theTransmission Temperature Warning Light is illumi-nated you could cause the fluid to boil over, c

3. Without pressing the brake pedal, push the ENGINESTART/STOP button once to return the ignition to theOFF/LOCK position.Vehicles Not Equipped With K

Distance To Empty (DTE)Shows the estimated distance that can be traveled withthe fuel remaining in the tank. This estimated distance isdetermined by a

• Ignition key removed from ignition switch• Battery at an acceptable charge level• RKE PANIC button not pressed• System not disabled from previous re

Vehicle SpeedPress and release the UP or DOWN button until “VehicleSpeed” displays highlighted in the EVIC and press theSELECT button. Press the SELEC

Tire PSIPress and release the UP or DOWN button until “TirePSI:” displays highlighted in the EVIC. Press the SELECTbutton to view a graphic of the veh

• Trailer Brake — If EquippedDisplays trailer brake output power and trailer brakestatus indicator.• Engine HoursDisplays the number of hours of engin

Automatic Compass CalibrationThis compass is self-calibrating, which eliminates theneed to manually reset the compass. When the vehicle isnew, the com

the vehicle is driven, per the zone map. Once properlyset, the compass will automatically compensate for thedifferences, and provide the most accurate

3. Press the DOWN button until the “Compass Variance”message is displayed in the EVIC, then press theSELECT button. The last variance zone number dis-

route mile by mile, turn-by-turn until the final destina-tion is reached. To make your selection, press and releasethe SELECT button until a check-mar

transmitter UNLOCK button twice, to unlock the passen-ger’s doors. When All Doors 1st Press is selected, all ofthe doors will unlock on the first pres

Horn With Remote StartWhen this feature is selected, a short horn sound willoccur when the RKE transmitter REMOTE START buttonis pressed. To make your

Headlamps With Wipers (Available With AutoHeadlights Only)When ON is selected, and the headlight switch is in theAUTO position, the headlights will tu

The EVIC message stays active until the ignition is turnedto the ON/RUN position.To Enter Remote Start ModePress and release the REMOTE START buttonon

Illuminated ApproachWhen this feature is selected, the headlights will activateand remain on for up to 90 seconds when the doors areunlocked with the

Easy Exit SeatThis feature provides automatic driver seat positioning toenhance driver mobility when entering and exiting thevehicle. To make your sel

To make your selection, press and release the SELECTbutton until a check-mark appears next to the featureshowing the system has been activated or the

Operating Instructions (Uconnect® Phone) — IfEquippedRefer to “Uconnect® Phone” for further details.Uconnect® 130Operating Instructions — Radio ModeNO

SEEK ButtonsPress and release the SEEK buttons to search for the nextlistenable station in AM/FM mode. Press the right switchto seek up and the left s

Setting The Tone, Balance And FadePush the rotary TUNE/SCROLL control knob and BASSwill display. Turn the TUNE/SCROLL control knob tothe right or left

SET/RND button, the station will continue to play butwill not be stored into pushbutton memory.You may add a second station to each pushbutton byrepea

radio display. If a CD does not go into the slot more than1.0 in (2.5 cm), a disc may already be loaded and must beejected before a new disc can be lo

NOTE: Ejecting with the ignition OFF is not allowed onconvertible or soft-top models (if equipped).SEEK ButtonPress the right SEEK button for the next

Notes On Playing MP3 FilesThe radio can play MP3 files; however, acceptable MP3file recording media and formats are limited. Whenwriting MP3 files, pa

To Exit Remote Start Mode And Drive The VehicleBefore the end of the 15-minute cycle, press and releasethe UNLOCK button on the RKE transmitter to unl

Multisession disc formats are supported by the radio. Mul-tisession discs may contain combinations of normal CDaudio tracks and computer files (includ

Playback Of MP3 FilesWhen a medium containing MP3 data is loaded, theradio checks all files on the medium. If the mediumcontains a lot of folders or f

Uconnect® 130 WITH SATELLITE RADIOOperating Instructions — Radio ModeNOTE: The ignition switch must be in the ON/RUN orACC position to operate the rad

another selection. Holding either button will bypassstations without stopping, until you release it.Voice Command System (Radio) — If EquippedRefer to

3. After adjusting the hours, press the right side TUNE/SCROLL control knob to set the minutes. The minuteswill begin to blink.4. Adjust the minutes u

Push the rotary TUNE/SCROLL control knob a secondtime and MID will display. Turn the TUNE/SCROLLcontrol knob to the right or left to increase or decre

Program Type16-Digit Character Dis-playClassical ClassiclClassic Rock Cls RockCollege CollegeCountry CountryForeign Language LanguageInformation Infor

If a preset button is activated while in the Music Type(Program Type) mode, the Music Type mode will beexited and the radio will tune to the preset st

Every time a preset button is used, a correspondingbutton number will display.Buttons1-6These buttons tune the radio to the stations that youcommit to

CAUTION!• This CD player will accept 4–3/4 in (12 cm) discsonly. The use of other sized discs may damage theCD player mechanism.• Do not use adhesive

Cancel Remote StartRemote Starting will also cancel if any of the followingoccur:• The engine stalls or engine speed exceeds 2500 rpm• Any engine warn

the current selection. Pressing and holding the SEEKbutton will allow faster scrolling through the tracks inCD and MP3 modes.TIME ButtonPress this but

Supported Media (Disc Types)The MP3 file recording media supported by the radio areCDDA, CD-R, CD-RW, MP3, and CDDA+MP3.Supported Medium Formats (File

Supported MP3 File FormatsThe radio will recognize only files with the *.MP3 exten-sion as MP3 files. Non-MP3 files named with the *.MP3extension may

Playback Of MP3 FilesWhen a medium containing MP3 data is loaded, theradio checks all files on the medium. If the mediumcontains a lot of folders or f

Press and hold the INFO button again for three secondsto return to ⬙elapsed time⬙ display.Operation Instructions — Auxiliary ModeThe auxiliary (AUX) j

radio system in your vehicle. Sirius will supply a wel-come kit that contains general information, includinghow to setup your on-line listening accoun

bikes should be placed as far rearward as possible, withinthe loading design of the rack. Do not place items directlyon or above the antenna.Reception

INFO ButtonPressing the INFO button will cycle the display informa-tion between Artist, Song Title, and Composer (if avail-able). Also, pressing and h

SETUP ButtonPressing the SETUP button allows you to select thefollowing items:• Display Sirius ID number — Press the AUDIO/SELECT button to display th

SETTING THE ANALOG CLOCKTo set the analog clock at the top center of the instrumentpanel, press and hold the button until the setting iscorrect.iPod®/

DOOR LOCKSManual Door LocksLock the front doors by pushing down on the lock knobson each door trim panel.If the lock knob is down when you shut either

NOTE:• If the radio has a USB port, refer to the appropriateUconnect® Multimedia radio User’s Manual foriPod® or external USB device support capabilit

NOTE: The glove compartment will have a positionwhere the iPod® or consumer electronic audio devicecable can be routed through without damaging the ca

MP3 control mode, audio tracks (if available from audiodevice) start playing over the vehicle’s audio system.Play ModeWhen switched to iPod®/USB/MP3 c

to the next screen of data for that track. Once allscreens have been viewed, the last INFO button presswill go back to the play mode screen on the rad

through the list faster. During fast scroll, a slight delayin updating the information on the radio display maybe noticeable.• During all List modes,

CAUTION!• Leaving the iPod® or external USB device (or anysupported device) anywhere in the vehicle in ex-treme heat or cold can alter the operation o

Selecting A Different Audio Device1. Press the PHONE button to begin.2. After the ⬙Ready⬙ prompt and following the beep, say⬙Setup⬙, then say ⬙Select

Getting Started• Screen(s) located in the overhead console: Unfold theoverhead LCD screen(s) by pushing the button on theoverhead console behind the s

• For Dual Video Screen System, Channel 1 on theRemote Control and Headphones refers to Screen 1(second row) and Channel 2 on the Remote Controland He

Using The Remote Control• Select an audio channel (Channel 1 for 2nd row screenand Channel 2 for 3rd row screen), then press thesource key and select

WARNING!• For personal security and safety in the event of acollision, lock the vehicle doors before you drive aswell as when you park and leave the v

When connecting an external source to the AUX input, besure to follow the standard color coding for the VES™jacks:NOTE: Certain high-end video games,

3. Touch the 1 soft-key and then touch either AUX 1 orAUX 2 in the VES™ column (depending which AUXinput is used). To exit press the back arrow soft-k

Using The Remote Control1. Press the SOURCE button on the Remote Control andthe Mode Select Screen will display, unless a video isplaying then only a

Using The Touchscreen Radio Controls1. Press the MENU hard-key on the radio faceplate.2. Touch the Rear VES™ soft-key to display the RearVES™ Controls

Dual Video ScreenNOTE: Typically there are two different ways to operatethe features of the Video Entertainment System (VES™).• The Remote Control• Th

Using The Remote Control1. Press the SOURCE button on the Remote Control.2.While looking at Screen 1 or 2, highlight DISC by eitherpressing Up/Down/Le

3. Touch the 1 or 2 soft-key and then the DISC soft-key inthe MEDIA column. To exit touch the back arrow atthe top left of the screen.NOTE:• To view a

Play A DVD Using The VES™ Player — IfEquipped1. Insert the DVD with the label facing up. The VES™player automatically selects the appropriate modeafte

NOTE:• Channel/Screen 1 select mode information is shownon the left side of the screen.• Channel/Screen 2 select mode information is shownon the right

NOTE:• To view a DVD on the radio press the RADIO/MEDIAhard-key, on the radio faceplate, then touch the DISCtab soft-key and then the VIEW VIDEO soft-

Power Door Locks — If EquippedA power door lock switch is on each front door trimpanel. Use this switch to lock or unlock the doors.If you press the p

3. To watch a Blu-ray™ Disc on Screen 2 for third rowpassengers, ensure the Remote Control and Head-phone switch is on Channel 2.Using The Remote Cont

• Viewing a Blu-ray™ Disc on the Touchscreen radioscreen is not available in all states/provinces. If avail-able, the vehicle must be stopped and the

Using The Touchscreen Radio Controls1. Press the MENU hard-key on the radio faceplate.2.Touch the Rear VES™ soft-key to display the Rear VES™Controls.

Important Notes For Dual Video Screen System• VES™ is able to transmit two channels of stereo audioand video simultaneously.• The Blu-ray™ Disc Player

VES™ Remote Control — If EquippedControls And Indicators1. Power – Turns the screen and wireless headphonetransmitter for the selected Channel on or o

5. 䉴䉴 – In radio modes, press to seek the next tunablestation. In disc modes, press and hold to fast forwardthrough the current audio track or video c

14. MODE/SOURCE – Press to change the mode of theselected channel. See the Mode Selection section ofthis manual for details on changing modes.15. SETU

Blu-ray™ Player Remote Control — If EquippedControls And Indicators1. Power – Turns the screen and wireless headphonetransmitter for the selected Chan

6. SETUP – Press to access the Blu-ray™ Setup menuscreen. When a disc is loaded in the Blu-ray™ player(if equipped) and the VES™ mode is selected and

Remote Control StorageThe video screen(s) come with a built in storage compart-ment for the remote control which is accessible when thescreen is opene

If you press the power door lock switch while the slidingdoor is open, the sliding door will lock.Automatic Door Locks — If EquippedWhen enabled, the

player (if equipped). If the vehicle is not equippedwith a DVD player, follow the radio’s instructions toturn Video Lock on. The radio and the video s

Blu-ray™ Headphones OperationThe headphones receive two separate channels of audiousing an infrared transmitter from the video screen.Front seat occup

ControlsThe headphone power indicator and controls are locatedon the right ear cup.NOTE: The rear video system must be turned on beforesound can be he

NOTE:• When both switches are on Channel 1, the Remote iscontrolling Channel 1 and the headphones are tunedto the audio of the VES™ Channel 1.• When b

Unwired® Stereo Headphone Lifetime LimitedWarrantyWho Does This Warranty Cover? This warranty coversthe initial user or purchaser (⬙you⬙ or ⬙your⬙) of

What Will Unwired® Do? Unwired®, at its option, willrepair or replace any defective Product. Unwired® re-serves the right to replace any discontinued

The VES™ has the ability to switch tuner (AM/FM),SEEK, SCAN, TUNE, and recall presets in radio modes aslong as it is not in shared mode.When in shared

4. Channel 2 Mode5. Channel 2 Shared Status6. Channel 2 Audio Only/Mute7. Channel 1 ENTER/OK Button Action8. Channel 2 ENTER/OK Button Action9. Clock1

makes it easy to enter a specific tuner frequency, satellitechannel, or track number. To enter the desired digit:1. Press the remote control’s navigat

Disc MenuWhen listening to a CD Audio or CD Data disc, pressingthe remote control’s POP UP/MENU button displays a listof all commands which control pl

On vehicles equipped with the optional Electronic Ve-hicle Information Center (EVIC), refer to “ElectronicVehicle Information Center (EVIC)/Personal S

Listening To Audio With The Screen ClosedTo listen to only audio portion of the channel with thescreen closed:• Set the audio to the desired source an

• CD: CD-DA, VCD, CD-TEXT• DVD/CD: MP3, WMA, AAC, DivX (versions3–6)profile 3.0Compressed Video Files (DivX)The Blu-Ray™ Player is capable of playing

DVD/Blu-ray™/BD Region CodesThe DVD player/Blu-ray™ Player and many DVD/Blu-ray™ Discs are coded by geographic region. These regioncodes must match in

• For multi-session CDs that contain only multiple CD-Audio sessions, the player will renumber the tracks soeach track number is unique.• For CD Data

⬙.WMA.⬙ AAC files must always end with the exten-sion ⬙aac⬙ or ⬙AAC.⬙ To prevent incorrect playback, donot use these extensions for any other types of

If a disc has a damaged track which results in audible orvisible errors that persists for 2.0 seconds, the DVD playerwill attempt to continue playing

All of the Language settings have a special ⬙Other⬙ settingto accommodate languages other than Japanese or Eng-lish. These languages are selected usin

Rating And Password SetupThe Rating and Password settings work together to controlthe types of DVDs that your family watches. Most DVD-Video discs hav

To set the password, activate the DVD Setup Menu andfollow these additional instructions:• Using the remote control Left and Right cursor but-tons, se

To set the rating, activate the DVD Setup Menu andfollow these additional instructions:• Using the remote control’s Left and Right cursorbuttons, sele

• If you unlock the doors using the Passive Entry doorhandles, but do NOT pull the handle, the doors willautomatically lock after 60 seconds.To Unlock

Code, you expressly assume all risk and liability associ-ated with downloading and using the Source Code andcomplying with the user agreements that ac

film and videos and their soundtracks. When a prohib-ited use of an unauthorized copy is detected, a messagewill be displayed and playback or copying

ABOUT DIVX VIDEO: DivX is a digital video formatcreated by DivX, LLC, a subsidiary of Rovi Corporation.This is an official DivX Certified® device that

STEERING WHEEL AUDIO CONTROLS — IFEQUIPPEDThe remote sound system controls are located on the rearsurface of the steering wheel, at the three and nine

Radio OperationPressing the top of the switch will SEEK up for the nextlistenable station, and pressing the bottom of the switchwill SEEK down for the

NOTE: If you experience difficulty in playing a particulardisc, it may be damaged (i.e., scratched, reflective coatingremoved, a hair, moisture or dew

The primary control for the rear blower is on the frontclimate control unit located on the instrument panel.When the front control is in any position

2. Rear Blower Control — If EquippedUse this control to regulate the amount of air forcedthrough the rear system in any mode you select. The rearblowe

NOTE: The air conditioning compressor may operate inMix and Defrost, even if the A/C button is not pressed.This dehumidifies the air to help dry the w

CAUTION! (Continued)• Do not use scrapers, sharp instruments, or abrasivewindow cleaners on the interior surface of thewindow.• Keep all objects a saf

NOTE: If “Unlock All Doors 1st Press” is programmedall doors will unlock when you grab hold of the driver’sfront door handle. To select between “Unloc

10. Air Conditioning (A/C) ButtonPress and release to change the current setting.The indicator illuminates when ON.NOTE: If your air conditioning perf

Economy ModeIf ECONOMY mode is desired, press the A/C button toturn off the indicator light and the A/C compressor.Rotate the temperature control knob

Rear Blower ControlThe rear blower control knob can be manually set to off,or any fixed blower speed, by rotating the knob from lowto high. This allow

Bi-Level ModeAir comes from both the headliner outlets and thefloor outlets.NOTE: In many temperature positions, the Bi-Levelmode is designed to provi

1. Air Conditioning (A/C) ButtonPress and release to change the current Air Conditioning(A/C) setting, the indicator illuminates when A/C is ON.Perfor

7. Right Front Seat Occupant Temperature DisplayThis display shows the temperature setting for the rightfront seat occupant.8. Front Defrost ButtonPre

14. Blower ControlThere are seven blower speeds, the blower speed in-creases as you move the control to the right from thelowest blower setting. Perfo

3. When the system is set up for your comfort level, it isnot necessary to change the settings. You will experi-ence the greatest efficiency by simply

outlets. If Economy mode is desired, press the A/Cbutton to turn off the A/C mode in the ATC display anddeactivate the A/C system.NOTE:• If the system

1. Mode DisplayThis display shows the current Mode selection.2. Rear Temperature DisplayThis display shows the temperature setting for the rearseat oc

To Enter The LiftgateWith a valid Passive Entry RKE transmitter within 5 ft(1.5 m) of the liftgate, cycle the handle to open the liftgateand pull the

The rear system temperature control is on the front ATCpanel located on the instrument panel.Pressing the Rear Temperature Lock button on the frontATC

2. Rotate the Rear Blower, Rear Temperature and theRear Mode Control knobs to suit your comfort needs.3. ATC is selected by adjusting the rear blower

CAUTION! (Continued)panel of the 3rd Row seat. Do not block or placeobjects directly in front of the inlet grille or heateroutlets. The electrical sys

Floor ModeAir comes from the floor outlets.Recirculation ControlWhen outside air contains smoke, odors, or high humid-ity, or if rapid cooling is desi

Vacation/StorageBefore you store your vehicle, or keep it out of service(i.e., vacation) for two weeks or more, run the airconditioning system at idle

STARTING AND OPERATINGCONTENTS䡵 STARTING PROCEDURES ...467▫ Automatic Transmission ...467▫ Keyless Enter-N-Go™ — If Equipped

䡵 POWER STEERING ...490▫ Power Steering Fluid Check ...490䡵 PARKING BRAKE ...491䡵 ANTI-LOCK BRAKE SYST

▫ Life Of Tire ...526▫ Replacement Tires ...527䡵 TIRE CHAINS (TRACTION DEVICES) ...528䡵 TIRE ROTATION RECO

䡵 ADDING FUEL ...549▫ Fuel Filler Cap (Gas Cap) ...549▫ Loose Fuel Filler Cap Message ...550䡵 VEHICLE LOADIN

STARTING PROCEDURESBefore starting your vehicle, adjust your seat, adjust theinside and outside mirrors, fasten your seat belt, and ifpresent, instruc

NOTE:• After pressing the door handle LOCK button, youmust wait two seconds before you can lock or unlockthe doors, using either Passive Entry door ha

CAUTION!Damage to the transmission may occur if the follow-ing precautions are not observed:• Do not shift from REVERSE, PARK, or NEUTRALinto any forw

Installing And Removing The ENGINESTART/STOP ButtonInstalling The Button1. Remove the key fob from the ignition switch.2. Insert the ENGINE START/STOP

To Turn Off The Engine Using ENGINESTART/STOP Button1. Place the shift lever/shift selector in PARK, then pressand release the ENGINE START/STOP butto

3. Press the ENGINE START/STOP button a second timeto change the ignition switch to the RUN position(EVIC displays “IGNITION MODE RUN”),4. Press the E

WARNING! (Continued)• If the vehicle has a discharged battery, boostercables may be used to obtain a start from a boosterbattery or the battery in ano

The starter motor will disengage automatically in 10seconds. Once this occurs, release the accelerator pedal,turn the ignition switch to the LOCK posi

AUTOMATIC TRANSMISSIONCAUTION!Damage to the transmission may occur if the follow-ing precautions are not observed:• Shift into PARK only after the veh

WARNING! (Continued)• Unintended movement of a vehicle could injurethose in or near the vehicle. As with all vehicles,you should never exit a vehicle

Key Ignition Park InterlockThis vehicle is equipped with a Key Ignition Park Inter-lock which requires the transmission to be in PARKbefore the igniti

When the Fuel Economy (ECON) Mode is engaged, thevehicle control systems will change the following:•The transmission will upshift sooner and downshift

WINDOWSPower Vent Windows — If EquippedThe Power Vent Window Switch located on the driver’sdoor trim panel allows the driver to operate the two ventwi

The electronically-controlled transmission provides aprecise shift schedule. The transmission electronics areself-calibrating; therefore, the first fe

PARK (P)This range supplements the parking brake by locking thetransmission. The engine can be started in this range.Never attempt to use PARK while t

WARNING! (Continued)• It is dangerous to shift out of PARK or NEUTRALif the engine speed is higher than idle speed. Ifyour foot is not firmly pressing

WARNING! (Continued)• Allowing children to be alone in a vehicle unat-tended is dangerous for a number of reasons. Achild or others could be seriously

REVERSE (R)This range is for moving the vehicle backward. Shift intoREVERSE only after the vehicle has come to a completestop.NEUTRAL (N)Use this rang

while towing heavy trailers), use the Electronic RangeSelect (ERS) shift control (described below) to select alower gear range. Under these conditions

3. Turn the ignition switch to the LOCK/OFF position.4. Wait approximately 10 seconds.5. Restart the engine.6. Shift into the desired gear range. If t

To exit ERS mode, simply press and hold the shift lever tothe right (+) until “D” is once again displayed in theinstrument cluster.WARNING!Do not down

Overdrive OperationThe automatic transmission includes an electronicallycontrolled Overdrive (sixth gear). The transmission willautomatically shift in

DRIVING ON SLIPPERY SURFACESAccelerationRapid acceleration on snow covered, wet, or other slip-pery surfaces may cause the driving wheels to pullerrat

NOTE: Power Window switches will also remain activefor up to 10 minutes after the ignition switch has beenturned to OFF, depending upon the accessory

DRIVING THROUGH WATERDriving through water more than a few inches/centimeters deep will require extra caution to ensuresafety and prevent damage to yo

CAUTION!• Always check the depth of the standing waterbefore driving through it. Never drive throughstanding water that is deeper than the bottom ofth

POWER STEERINGThe standard power steering system will give you goodvehicle response and increased ease of maneuverabilityin tight spaces. The system w

apparent, and/or the system is not functioning as antici-pated. Coordinate inspection efforts through an autho-rized dealer.CAUTION!Do not use chemica

When the parking brake is applied with the ignitionswitch in the ON position, the “Brake Warning Light” inthe instrument cluster will illuminate.NOTE:

WARNING!• When leaving the vehicle, always remove the KeyFob from the ignition and lock your vehicle.• Never leave children alone in a vehicle, or wit

ANTI-LOCK BRAKE SYSTEM (ABS)The Anti-Lock Brake System (ABS) provides increasedvehicle stability and brake performance under mostbraking conditions. T

WARNING! (Continued)• The Anti-Lock Brake System cannot prevent colli-sions, including those resulting from excessivespeed in turns, following another

Warning Light” does not come on when the ignitionswitch is turned to the ON position, have the bulbrepaired as soon as possible.If both the “Brake War

your speed and driving to the prevailing road conditions,and do not switch off the ESC or TCS.WARNING!• The TCS cannot prevent the natural laws of phy

INTRODUCTIONCONTENTS䡵 INTRODUCTION ...4䡵 HOW TO USE THIS MANUAL ...4䡵 WARNINGS AND CAUTIONS ...6䡵 VEHICLE I

switches will operate only when the ignition switch is inthe ON/RUN or ACC position and during power acces-sory delay.Auto-Down Feature — If EquippedT

WARNING!• The BAS cannot prevent the natural laws of phys-ics from acting on the vehicle, nor can it increasethe traction afforded by prevailing road

WARNING!The Electronic Stability Control System (ESC) cannotprevent the natural laws of physics from acting onthe vehicle, nor can it increase the tra

When in the “Partial Off” mode, the TCS portion of ESC,except for the “limited slip” feature described in the TCSsection, has been disabled and the “E

ESC Activation/Malfunction Indicator Light AndESC OFF Indicator LightThe “ESC Activation/Malfunction IndicatorLight” in the instrument cluster will co

• The ESC system will make buzzing or clicking soundswhen it is active. This is normal; the sounds will stopwhen ESC becomes inactive following the ma

brake pedal. If the driver does not apply the throttleduring this short period of time, the system will releasebrake pressure and the vehicle will rol

For vehicles not equipped with the EVIC, perform thefollowing steps:NOTE: You must complete Steps 1 through 8 within 90seconds.1. Center the steering

Towing With HSAHSA will provide assistance when starting on a gradewhen pulling a trailer.WARNING!• If you use a trailer brake controller with yourtra

TIRE SAFETY INFORMATIONTire MarkingsNOTE:• P (Passenger) - Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”mold

• Temporary spare tires are designed for temporaryemergency use only. Temporary high pressure com-pact spare tires have the letter “T” or “S” molded i

Auto Up Feature With Anti-Pinch Protection — IfEquippedThe front driver and front passenger switches may beequipped with an Auto Up feature. Lift the

EXAMPLE:65 = Aspect ratio in percent (%)— Ratio of section height to section width of tire10.5 = Section width in inches (in)R = Construction code— ⬙R

EXAMPLE:Load Identification:ⴖ...blank...ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tireExtra Load (XL) = Ext

EXAMPLE:DOT MA L9 ABCD 0301DOT = Department of Transportation— This symbol certifies that the tire is in compliance with the U.S. Department of Transp

Tire Terminology And DefinitionsTerm DefinitionB-Pillar The vehicle B-Pillar is the structural member of the body locatedbehind the front door.Cold Ti

Tire Loading And Tire PressureTire And Loading Information Placard LocationNOTE: The proper cold tire inflation pressure is listed onthe driver’s side

Tire And Loading Information PlacardThis placard tells you important information about the:1. Number of people that can be carried in the vehicle.2. T

LoadingThe vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load

4. The resulting figure equals the available amount ofcargo and luggage load capacity. For example, if“XXX” amount equals 1,400 lbs (635 kg) and there

516 STARTING AND OPERATING

WARNING!Overloading of your tires is dangerous. Overloadingcan cause tire failure, affect vehicle handling, andincrease your stopping distance. Use ti

2. Push the window switch down firmly to the seconddetent to open the window completely and continueto hold the switch down for an additional two seco

WARNING! (Continued)• Unequal tire pressures from one side of the vehicleto the other can cause the vehicle to drift to theright or left.• Always driv

At least once a month:•Check and adjust tire pressure with a good qualitypocket-type pressure gauge. Do not make a visual judge-ment when determining

Tire Pressures For High Speed OperationThe manufacturer advocates driving at safe speeds andwithin posted speed limits. Where speed limits or condi-ti

Consult an authorized tire dealer for tire repairs andadditional information.Damaged Run Flat tires, or Run Flat tires that haveexperienced a loss of

If you need snow tires, select tires equivalent in size andtype to the original equipment tires. Use snow tires onlyin sets of four; failure to do so

Spare Tires — If EquippedNOTE: For vehicles equipped with TIREFIT instead of aspare tire, please refer to “TIREFIT KIT” in “What To DoIn Emergencies”

Do not install a wheel cover or attempt to mount aconventional tire on the compact spare wheel, since thewheel is designed specifically for the compac

WARNING!Limited-use spares are for emergency use only. In-stallation of this limited-use spare tire affects vehiclehandling. With this tire, do not dr

These indicators are molded into the bottom of the treadgrooves. They will appear as bands when the tread depthbecomes 1/16 in (2 mm). When the tread

WARNING!Tires and the spare tire should be replaced after sixyears, regardless of the remaining tread. Failure tofollow this warning can result in sud

Wind BuffetingWind buffeting can be described as the perception ofpressure on the ears or a helicopter-type sound in theears. Your vehicle may exhibit

WARNING!•Do not use a tire, wheel size or rating other than thatspecified for your vehicle. Some combinations ofunapproved tires and wheels may change

• Install on front tires only.• On a 225/65R16 100H use of a traction device thatmeets the SAE type “Class S” specification is recom-mended.• On a 225

CAUTION! (Continued)• Observe the traction device manufacturer’s instruc-tions on the method of installation, operatingspeed, and conditions for use.

TIRE PRESSURE MONITOR SYSTEM (TPMS)The TPMS will warn the driver of a low tire pressurebased on the cold inflation tire placard pressure require-ments

The TPMS will continue to warn the driver of low tirepressure as long as the condition exists, and will not turnoff until the tire pressure is at or a

CAUTION!• The TPMS has been optimized for the originalequipment tires and wheels. TPMS pressures havebeen established for the tire size equipped on yo

• Seasonal temperature changes will affect tire pressure,and the TPMS will monitor the actual tire pressure inthe tire.Base SystemThe TPMS uses wirele

NOTE: The vehicle may need to be driven for up to 20minutes above 15 mph (24 km/h) to receive this infor-mation.The “Tire Pressure Monitoring Telltale

• After driving for up to 20 minutes above 15 mph(24 km/h), the “Tire Pressure Monitoring TelltaleLight” will flash on and off for 75 seconds and then

TPMS Low Pressure WarningsThe “Tire Pressure Monitoring Telltale Light” will illumi-nate in the instrument cluster, and an audible chime willbe activa

NOTE: The left side sliding door cannot be openedwhile the fuel door is open. This feature operates onlywhen the sliding door is fully closed prior to

message will not be present, and a pressure value will bedisplayed instead of dashes. A system fault can occur byany of the following scenarios:• Jamm

• After driving the vehicle for up to 20 minutes above15 mph (24 km/h), the “Tire Pressure MonitoringTelltale Light” will flash on and off for 75 seco

The TPM sensors are regulated under one of the follow-ing licenses:United States MRXC4W4MA4Canada 2546A-C4W4MA4FUEL REQUIREMENTS3.6L EngineThis engine

Reformulated GasolineMany areas of the country require the use of cleanerburning gasoline referred to as “Reformulated Gasoline”.Reformulated gasoline

E-85 Usage In Non-Flex Fuel VehiclesNon-Flex Fuel Vehicles (FFV) are compatible with gaso-line containing 10% ethanol (E10). Gasoline with higherethan

without MMT be used in your vehicle. The MMT contentof gasoline may not be indicated on the gasoline pump,therefore, you should ask your gasoline reta

CAUTION! (Continued)• The use of fuel additives, which are now beingsold as octane enhancers, is not recommended.Most of these products contain high c

WARNING! (Continued)• Guard against carbon monoxide with proper main-tenance. Have the exhaust system inspected everytime the vehicle is raised. Have

Ethanol Fuel (E-85)E-85 is a mixture of approximately 85% fuel ethanol and15% unleaded gasoline.WARNING!Ethanol vapors are extremely flammable and cou

For best results, a refueling pattern that avoids alternat-ing between E-85 and unleaded gasoline is recom-mended.When you do switch fuel types it is

If the inside or outside door handles are used while thepower sliding side door is activated, the power slidingdoor feature will be canceled and will

StartingThe characteristics of E-85 fuel make it unsuitable for usewhen ambient temperatures fall below 0°F (-18°C). In therange of 0°F (-18°C) to 32°

ADDING FUELFuel Filler Cap (Gas Cap)The gas cap is located behind the fuel filler door on theleft side of the vehicle. If the gas cap is lost or damag

WARNING!• Never have any smoking materials lit in or near thevehicle when the gas cap is removed or the tank isbeing filled.• Never add fuel when the

properly tightened. Refer to “Onboard Diagnostic Sys-tem” in “Maintaining Your Vehicle” for further informa-tion.If the problem continues, the message

Gross Axle Weight Rating (GAWR)The GAWR is the maximum capacity of the front and rearaxles. Distribute the load over the front and rear axlesevenly. M

OverloadingThe load carrying components (axle, springs, tires,wheels, etc.) of your vehicle will provide satisfactoryservice as long as you do not exc

TRAILER TOWINGIn this section you will find safety tips and informationon limits to the type of towing you can reasonably dowith your vehicle. Before

rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica-tion Label” in “Starting and Operating” for furtherinformation.WARNING!It is important that you

Weight-Carrying HitchA weight-carrying hitch supports the trailer tongueweight, just as if it were luggage located at a hitch ball orsome other connec

Trailer Hitch ClassificationThe following chart provides the industry standard forthe maximum trailer weight a given trailer hitch class cantow and sh

• If the power sliding side door is not in the full open orclose position, it will fully open when a power slidingdoor switch is pressed. To close the

Trailer Towing Weights (Maximum Trailer Weight Ratings)The following chart provides the maximum trailer weight ratings towable for your given drivetra

NOTE: The trailer tongue weight must be considered aspart of the combined weight of occupants and cargo, andshould never exceed the weight referenced

NOTE: Remember that everything put into or on thetrailer adds to the load on your vehicle. Also, additionalfactory-installed options or dealer-install

WARNING!Improper towing can lead to a collision. Follow theseguidelines to make your trailer towing as safe aspossible:• Make certain that the load is

WARNING! (Continued)• Total weight must be distributed between the towvehicle and the trailer such that the following fourratings are not exceeded:1.

Towing Requirements — Trailer Brakes• Do not interconnect the hydraulic brake system orvacuum system of your vehicle with that of the trailer.This cou

Towing Requirements — Trailer Lights And WiringWhenever you pull a trailer, regardless of the trailer size,stoplights and turn signals on the trailer

Towing TipsBefore setting out on a trip, practice turning, stopping,and backing up the trailer in an area located away fromheavy traffic.Automatic Tra

If you REGULARLY tow a trailer for more than 45minutes of continuous operation, then change the trans-mission fluid and filter as specified for “polic

RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)Towing This Vehicle Behind Another VehicleTowing Condition Wheels OFF the Ground All ModelsFlat Tow NONE N

You can turn the feature back on by repeating theprevious procedure.Power Sliding Side Door Master Lock SwitchTo provide a safer environment for small

Recreational Towing — All ModelsRecreational towing is allowed ONLY if the front wheelsare OFF the ground. This may be accomplished using atow dolly o

WHAT TO DO IN EMERGENCIESCONTENTS䡵 HAZARD WARNING FLASHERS ...571䡵 IF YOUR ENGINE OVERHEATS ...571䡵 TIREFIT KIT — IF EQUIPPED ...

▫ Road Tire Installation ...603䡵 JUMP-STARTING ...605▫ Preparations For Jump-Start ...606▫ Jump-Starting

HAZARD WARNING FLASHERSThe Hazard Warning flasher switch is located in thelower center area of the instrument panel.Press the switch to turn on the Ha

CAUTION!Driving with a hot cooling system could damageyour vehicle. If temperature gauge reads “H”, pullover and stop the vehicle. Idle the vehicle wi

1. Open the liftgate.2. Turn the two rear left side trim panel latches to releasethe trim panel.TIREFIT Kit Location TIREFIT Kit6WHAT TO DO IN EMERGEN

TIREFIT Kit Components And Operation Using The Mode Select Knob And HosesYour TIREFIT kit is equipped with the following symbolsto indicate the air or

Using The Power ButtonPush and release the Power Button (4) once toturn On the TIREFIT kit. Push and release thePower Button (4) again to turn Off the

• When the TIREFIT sealant is in a liquid form, cleanwater, and a damp cloth will remove the material fromthe vehicle or tire and wheel components. On

WARNING! (Continued)– If you are unsure of the condition of the tire orthe wheel.• Keep TIREFIT away from open flames or heatsource.• A loose TIREFIT

Sliding Side Door Child Protection LockTo provide a safer environment for small children ridingin the rear seats, the sliding doors are equipped with

Sealing A Tire With TIREFIT(A) Whenever You Stop To Use TIREFIT:1. Pull over to a safe location and turn on the vehicle’sHazard Warning flashers.2.Ver

(C) Injecting TIREFIT Sealant Into The DeflatedTire:• Always start the engine before turning ON the TIRE-FIT kit.NOTE: Manual transmission vehicles mu

If the sealant (white fluid) does flow through theSealant Hose (6):1. Continue to operate the pump until sealant is nolonger flowing through hose (typ

3. Immediately disconnect the Sealant Hose (6) from thevalve stem, reinstall the cap on the fitting at the end ofthe hose, and place the TIREFIT kit i

(E) After Driving:Pull over to a safe location. Refer to “Whenever You Stopto Use TIREFIT” before continuing.1. Push in the Mode Select Knob (5) and t

5. Replace the Sealant Bottle (1) and Sealant Hose (6)assembly at your authorized dealer as soon as pos-sible. Refer to (F) “Sealant Bottle and Hose R

Torque SpecificationsLug Nut/Bolt Torque **Lug Nut/Bolt SizeLug Nut/BoltSocketSize100 Ft-Lbs (135 N·m) M12 x 1.25 19 mm**Use only Chrysler recommended

After 25 miles (40 km) check the lug nut/bolt torque to besure that all the lug nuts/bolts are properly seatedagainst the wheel.WARNING!To avoid the r

WARNING! (Continued)• Being under a jacked-up vehicle is dangerous. Thevehicle could slip off the jack and fall on you. Youcould be crushed. Never put

Spare Tire RemovalThe spare tire is stowed inside a protective cover locatedunder the center of the vehicle between the front doors bymeans of a cable

NOTE:• After engaging the Child Protection Door Lock, alwaystest the door from the inside to make certain it is in thedesired position.• When the Chil

To Access Spare Tire Winch Drive NutTo access the spare tire winch drive nut and lower thespare tire, you will need to refer to one of the followingce

2. Open the front drawer to expose the storage compart-ment.3. Remove the liner from the console’s storage compart-ment to access the spare tire winch

Spare Tire ToolsThe tool pouch contains three pieces and can be as-sembled into a spare tire hook; to remove the compactspare tire/cover assembly from

Spare Tire Removal InstructionsThe spare tire is located under the vehicle beneath thecenter console area.1. Assemble the spare tire tools into a T-ha

2. Rotate the nut to the left until the winch mechanismstops turning freely. This will allow enough slack inthe cable to allow you to pull the spare t

4. Stand the tire/cover assembly upright and remove thewheel spacer by squeezing the winch retaining tabstogether. Push the retainer through the spare

6. Block both the front and rear of the wheel diagonallyopposite of the jacking position. Forexample, if changing the right fronttire, block the left

WARNING! (Continued)• Do not let anyone sit in the vehicle when it is on ajack.• Do not get under the vehicle when it is on a jack. Ifyou need to get

2. There are two jack engagement locations on each sideof the vehicle body. These locations are on the sillflange of the vehicle body.CAUTION!Do not a

Front jack location is on the sill flange of the vehicle bodyand is located 6 in (150 mm) from door edge.Rear Jack Engaged Front Jack Locations6WHAT T

INTRODUCTIONCongratulations on selecting your new Chrysler GroupLLC vehicle. Be assured that it represents precisionworkmanship, distinctive styling,

To Disengage The Child Protection Door Lock1. Open the sliding side door.2. Slide the Child Protection Door Lock control outward(away from the vehicle

NOTE: In some situations the jack may need to beplaced on its side in order to be pushed under the vehicle.Return the jack to its correct orientation

WARNING!Raising the vehicle higher than necessary can makethe vehicle less stable. It could slip off the jack andhurt someone near it. Raise the vehic

NOTE: Do not install the wheel cover on the compactspare.7. Lower the vehicle by turning the jack screw to the left.8. Refer to “Torque Specifications

Securing The Compact Spare Tire1. Assemble the winch handle extensions to form aT-handle and fit the winch T-handle over the drivenut. Rotate the nut

CAUTION!The compact spare tire/cover assembly must be usedwhen the compact spare tire is stored. Failure to usethis cover could drastically reduce the

Road Tire InstallationVehicles Equipped With Wheel Covers1. Mount the road tire on the axle.2. To ease the installation process for steel wheels withw

3. Align the valve notch in the wheel cover with thevalve stem on the wheel. Install the cover by hand,snapping the cover over the two lug nuts. Do no

3. Lower the vehicle to the ground by turning the jackhandle counterclockwise.4. Refer to “Torque Specifications” in this section forproper wheel lug

Preparations For Jump-StartThe battery in your vehicle is located on the left side ofthe engine compartment.WARNING!• Take care to avoid the radiator

3. If using another vehicle to jump-start the battery, parkthe vehicle within the jumper cables reach, set theparking brake and make sure the ignition

To open the liftgate, press the liftgate release handlelocated on the underside of the license plate bar and pullthe liftgate open with one fluid moti

4. Connect the opposite end of the negative (-) jumpercable to a good engine ground (exposed metal part ofthe discharged vehicle’s engine) away from t

CAUTION!Accessories plugged into the vehicle power outletsdraw power from the vehicle’s battery, even when notin use (i.e., cellular phones, etc.). Ev

CAUTION!• When “rocking” a stuck vehicle by shifting be-tween DRIVE and REVERSE, do not spin thewheels faster than 15 mph (24 km/h), or drivetraindama

3. Using a small screwdriver or similar tool, remove theshift lever override access cover (located near the topright of the shift lever in the instrum

TOWING A DISABLED VEHICLEThis section describes procedures for towing a disabledvehicle using a commercial wrecker service.Towing Condition Wheels OFF

Proper towing or lifting equipment is required to preventdamage to your vehicle. Use only tow bars and otherequipment designed for this purpose, follo

The manufacturer recommends towing your vehicle withall four wheels OFF the ground using a flatbed. If flatbedequipment is not available, and the tran

MAINTAINING YOUR VEHICLECONTENTS䡵 ENGINE COMPARTMENT — 3.6L ...617䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .618▫ Loose Fuel Filler Cap Message ..

▫ Appearance Care And Protection FromCorrosion ...645▫ Cleaning The Instrument Panel Cupholders . .650䡵 FUSES ...

ENGINE COMPARTMENT — 3.6L1 — Air Filter 6 — Engine Coolant Reservoir2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick3 — Brake Fluid Reservoi

The power liftgate may be closed by pressing the button,located in the upper left trim in the liftgate opening.Pushing once will only close the liftga

ONBOARD DIAGNOSTIC SYSTEM — OBD IIYour vehicle is equipped with a sophisticated OnboardDiagnostic system called OBD II. This system monitorsthe perfor

“Electronic Vehicle Information Center (EVIC)” in ”Un-derstanding Your Instrument Panel” for further informa-tion. Tighten the gas cap until a ⬙clicki

Your vehicle has a simple ignition key-actuated test,which you can use prior to going to the test station. Tocheck if your vehicle’s OBD II system is

before going to the I/M station. The I/M station can failyour vehicle because the MIL is on with the enginerunning.REPLACEMENT PARTSUse of genuine MOP

Besides those maintenance items specified in the fixed“Maintenance Schedule”, there are other componentswhich may require servicing or replacement in

Engine OilChecking Oil LevelTo assure proper engine lubrication, the engine oil mustbe maintained at the correct level. Check the oil level atregular

American Petroleum Institute (API) Engine OilIdentification SymbolThis symbol means that the oil hasbeen certified by the AmericanPetroleum Institute

Synthetic Engine OilsYou may use synthetic engine oils provided the recom-mended oil quality requirements are met, and the recom-mended maintenance in

WARNING!The air induction system (air cleaner, hoses, etc.) canprovide a measure of protection in the case of enginebackfire. Do not remove the air in

WARNING!• Exhaust gases can injure or kill. They containcarbon monoxide (CO), which is colorless andodorless. Breathing it can make you unconsciousand

When the RKE transmitter button is pressed and theFlash Lights feature is enabled, the tail lights will flashand several audible beeps will occur to s

Under normal operating conditions, the catalytic con-verter will not require maintenance. However, it is im-portant to keep the engine properly tuned

WARNING!• Battery fluid is a corrosive acid solution and canburn or even blind you. Do not allow battery fluidto contact your eyes, skin, or clothing.

Air Conditioner MaintenanceFor best possible performance, your air conditioner shouldbe checked and serviced by an authorized dealer at the startof ea

Refrigerant Recovery And RecyclingR-134a Air Conditioning Refrigerant is a hydrofluoro-carbon (HFC) that is endorsed by the EnvironmentalProtection Ag

5. Remove the A/C air filter by pulling it straight out ofthe housing.6. Install the A/C air filter with the arrow on the filterpointing toward the fl

attention should also be given to hood latching compo-nents to ensure proper function. When performing otherunderhood services, the hood latch, releas

The washer fluid reservoir will hold a full gallon of fluidwhen the Low Washer Fluid Light illuminates.WARNING!Commercially available windshield washe

Coolant ChecksCheck the engine coolant (antifreeze) protection every 12months (before the onset of freezing weather, whereapplicable). If the engine c

CAUTION!• Mixing of engine coolant (antifreeze) other thanspecified Organic Additive Technology (OAT) en-gine coolant (antifreeze), may result in engi

important that you use the same engine coolant (OATcoolant conforming to MS-12106) throughout the life ofyour vehicle.Please review these recommendati

• The power liftgate will not operate in temperaturesbelow −12°F (−24°C) or temperatures above 143°F(62°C). Be sure to remove any buildup of snow or i

• Mixing engine coolant (antifreeze) types is not recom-mended and can result in cooling system damage. IfHOAT and OAT coolant are mixed in an emergen

Disposal Of Used Engine CoolantUsed ethylene glycol-based engine coolant (antifreeze) isa regulated substance requiring proper disposal. Checkwith you

If an examination of your engine compartment shows noevidence of radiator or hose leaks, the vehicle may besafely driven. The vapor will soon dissipat

WARNING!Riding the brakes can lead to brake failure andpossibly a collision. Driving with your foot resting orriding on the brake pedal can result in

WARNING!• Use only manufacturer’s recommended brakefluid. Refer to “Fluids, Lubricants, and GenuineParts” in “Maintaining Your Vehicle” for furtherinf

WARNING! (Continued)• Do not allow petroleum based fluid to contaminatethe brake fluid. Brake seal components could bedamaged, causing partial or comp

CAUTION!Do not use chemical flushes in your transmission asthe chemicals can damage your transmission compo-nents. Such damage is not covered by the N

Appearance Care And Protection From CorrosionProtection Of Body And Paint From CorrosionVehicle body care requirements vary according to geo-graphic l

• If insects, tar, or other similar deposits have accumu-lated on your vehicle, use MOPAR® Super Kleen Bugand Tar Remover to remove.• Use a high quali

• If you carry special cargo such as chemicals, fertilizers,de-icer salt, etc., be sure that such materials are wellpackaged and sealed.• If a lot of

• Supplemental Active Head Restraints (AHR) locatedon top of the front seats (integrated into the headrestraint)• Supplemental Driver Side Knee Air Ba

• Blot any remaining stain with a clean, damp towel.• For tough stains, apply MOPAR® Total Clean, or amild soap solution to a clean, damp cloth and re

liquid. Please do not use polishes, oils, cleaning fluids,solvents, detergents, or ammonia-based cleaners to cleanyour leather upholstery. Application

Cleaning Plastic Instrument Cluster LensesThe lenses in front of the instruments in this vehicle aremolded in clear plastic. When cleaning the lenses,

InstallationPlace the liner into the cupholder drawer and press theliner into place so that the retention tabs seat into thecorresponding openings in

CAUTION!• When installing the Totally Integrated Power Mod-ule cover, it is important to ensure the cover isproperly positioned and fully latched. Fai

Cavity Cartridge Fuse Mini-Fuse DescriptionJ1 40 Amp Green — Power Folding SeatJ2 30 Amp Pink — Power Liftgate ModuleJ3 30 Amp Pink — Rear Door Module

Cavity Cartridge Fuse Mini-Fuse DescriptionJ13 60 Amp Yellow — Ignition Off Draw (IOD) – MainJ14 40 Amp Green — Rear Window DefoggerJ15 40 Amp Green —

Cavity Cartridge Fuse Mini-Fuse DescriptionM6 — 20 Amp YellowPower Outlet #1 (ACC), Rain Sensor, CigarLighter (Instrument Panel or with Console Rear)M

Cavity Cartridge Fuse Mini-Fuse DescriptionM15 — 20 Amp Yellow Rear View Mirror, Instrument Cluster, Multi-Function Control Switch, Tire Pressure Moni

Cavity Cartridge Fuse Mini-Fuse DescriptionM26 — 10 Amp Red Power Mirror Switch, Driver Window SwitchM27 — 10 Amp RedWireless Control Module, Keyless

Here are some simple steps you can take to minimize therisk of harm from a deploying air bag:1. Children 12 years old and under should always ridebuck

Cavity Cartridge Fuse Mini-Fuse DescriptionM37 — 10 Amp Red Antilock Brakes, Stability Control, Stop Lamp,Fuel PumpM38 — 25 Amp Natural Door Lock/Unlo

REPLACEMENT BULBSInterior BulbsBulb NumberCenter & Rear DomeLamp578Center & Rear ReadingLamps578Front Door CourtesyLamp578Front Header Reading

Bulb NumberRear Turn Signal Lamp 3757ARear Tail, Stop, and SideMarker LampLED (Serviced at Autho-rized Dealer)Center High-MountedStop LampLED (Service

NOTE: On vehicles equipped with High Intensity Dis-charge (HID) headlamps, when the headlamps areturned on, there is a blue hue to the lamps. This dim

Front Side Marker Lamp1. Raise the hood to access the rear of the headlamphousing.NOTE: Access is somewhat limited. You may have toremove the inner fe

2. Disconnect wire harness from the bulb.3. Reconnect the wiring harness to the new bulb andreinstall the bulb by twisting clockwise.Rear Turn Signal

3. Twist the socket and remove it from the lamp assem-bly.4. Pull the bulb to remove it from the socket.5. Replace the bulb, reinstall the socket, and

FLUID CAPACITIESU.S. MetricFuel (Approximate) 20 Gallons 76 LitersEngine Oil with Filter3.6L Engine (SAE 5W-20, API Certi-fied).6 Quarts 5.6 LitersCoo

FLUIDS, LUBRICANTS AND GENUINE PARTSEngineComponent Fluid, Lubricant, or Genuine PartEngine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10

ChassisComponent Fluid, Lubricant, or Genuine PartAutomatic Transmission Use Only ATF+4® Automatic Transmission Fluid. Fail-ure to use ATF+4® fluid ma

4. Do not lean against the door or window. If yourvehicle has side air bags, and deployment occurs, theside air bags will inflate forcefully into the

MAINTENANCE SCHEDULESCONTENTS䡵 MAINTENANCE SCHEDULE ...670 ▫ Maintenance Chart ...6728MAINTENANCESCHEDULES

MAINTENANCE SCHEDULEYour vehicle is equipped with an automatic oil changeindicator system. The oil change indicator system willremind you that it is t

•Check tire pressure and look for unusual wear ordamage. Rotate tires at the first sign of irregular wear,even if it occurs before the oil indicator s

Maintenance ChartRefer to the Maintenance Schedules on the followingpages for the required maintenance intervals.Mileage or time passed(whichever come

Mileage or time passed(whichever comes first)20,00030,00040,00050,00060,00070,00080,00090,000100,000110,000120,000130,000140,000150,000Or Years: 2 3 4

Mileage or time passed(whichever comes first)20,00030,00040,00050,00060,00070,00080,00090,000100,000110,000120,000130,000140,000150,000Or Years: 2 3 4

WARNING!• You can be badly injured working on or around amotor vehicle. Do only service work for which youhave the knowledge and the right equipment.

IF YOU NEED CONSUMER ASSISTANCECONTENTS䡵 SUGGESTIONS FOR OBTAINING SERVICE FORYOUR VEHICLE ...679▫ Prepare For The Appointment...

WARNING! (Continued)• In a collision, you and your passengers can suffermuch greater injuries if you are not properly buck-led up. You can strike the

䡵 DEPARTMENT OF TRANSPORTATION UNIFORMTIRE QUALITY GRADES ...685▫ Treadwear...685▫ Traction Grades ...

SUGGESTIONS FOR OBTAINING SERVICE FORYOUR VEHICLEPrepare For The AppointmentIf you are having warranty work done, be sure to havethe right papers with

facilities, factory-trained technicians, special tools, andthe latest information to ensure the vehicle is fixedcorrectly and in a timely manner.This

In Mexico Contact:Av. Prolongacion Paseo de la Reforma, 1240Sante Fe C.P. 05109Mexico, D. F.In Mexico City: 5081-7568Outside Mexico City: 1-800-505-13

The manufacturer will not stand behind any servicecontract that is not the manufacturer’s service contract. Itis not responsible for any service contr

MOPAR® PARTSMOPAR® fluids, lubricants, parts, and accessories areavailable from an authorized dealer. They are recom-mended for your vehicle in order

PUBLICATION ORDER FORMSTo order the following manuals, you may use either thewebsite or the phone numbers listed below. Visa, Mas-tercard, American Ex

Call toll free at:• 1–800–890–4038 (U.S.)• 1–800–387–1143 (Canada)OrVisit us on the Worldwide Web at:• www.techauthority.comDEPARTMENT OF TRANSPORTATI

WARNING!The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does notinclude acceleration, cornering, hydrop

INDEX10

WARNING!• It is dangerous to ride in a cargo area, inside oroutside of a vehicle. In a collision, people riding inthese areas are more likely to be se

Adding Engine Coolant (Antifreeze) ...636Adding Fuel ...549Adding Washer Fluid ...633Additives,

Fluid and Filter Changes ...644Fluid Change ...644Fluid Level Check ...644Fluid Type ...

Car Washes ...645Cellular Phone ...151Center High Mounted Stop Light ...664Certification

Disposal of Used Coolant ...639Drain, Flush, and Refill ...635Inspection ...639Points to Rememb

Electronic Speed Control (Cruise Control) ...243Electronic Stability Control (ESC) ...498Electronic Vehicle Information Center (EVIC)

FCC General Information (Sentry Key) ...18Filler Location Fuel ...328FiltersAir Cleaner ...625Air

Ethanol ...541Filler Cap (Gas Cap) ...328Filler Door (Gas Cap) ...328Gasoline ...

HazardDriving Through Flowing, Rising, or ShallowStanding Water ...488Hazard Warning Flasher ...571HeadlightsCl

iPod®/USB/MP3 ControlBluetooth® Streaming Audio ...186Jack Location ...586Jack Operation ...

Headlights On Reminder ...228High Beam Indicator ...321High Beam/Low Beam Select ...232Illuminated Entry

1INTRODUCTION 5

2. The seat belt latch plate is near the seatback of thefront seats and next to your arm in the rear seats.Grasp the latch plate and pull out the belt

Malfunction Indicator Light (Check Engine)...326Manual, Service ...684Map/Reading Lights ...261Memory F

Materials Added to ...625Recommendation ...623Synthetic ...625Viscosity ...

Programmable Electronic Features ...353Radial Ply Tires ...520Radiator Cap (Coolant Pressure Cap) ...638Radio

Satellite Radio Antenna ...383Schedule, Maintenance ...670Seat Belt Maintenance ...650Seat Belt

Spare Tire...523Speed Control (Cruise Control)...243Speedometer...328Starting ...

Air Pressure ...517Chains ...528Changing ...585Compact Spare ...

Cooling System Tips ...566Hitches ...557Minimum Requirements ...560Tips...

Universal Transmitter ...264Unleaded Gasoline ...540Upholstery Care ...648Vanity Mirror

INSTALLATION OF RADIO TRANSMITTINGEQUIPMENTSpecial design considerations are incorporated into this vehicle’selectronic system to provide immunity to

300Chrysler Group LLC OWNER’S MANUAL 2014 30014C482-126-AA First Edition Printed in U.S.A.14Y531-126-ACThird EditionPrinted in U.S.A.

WARNING!•A belt that is buckled into the wrong buckle willnot protect you properly. The lap portion could ridetoo high on your body, possibly causing

WARNING!•A lap belt worn too high can increase the risk ofinternal injury in a collision. The belt forces won’tbe at the strong hip and pelvic bones,

6. To release the belt, push the red button on the buckle.The belt will automatically retract to its stowed posi-tion. If necessary, slide the latch p

Adjustable Upper Shoulder Belt AnchorageIn the front seats and the second row outboard seats, theshoulder belt anchorage can be adjusted upward or dow

Seat Belts In Passenger Seating PositionsThe seat belts in the passenger seating positions areequipped with an Automatic Locking Retractor (ALR) ora c

If the passenger seating position is equipped with anALR and is being used for normal usage:Only pull the belt webbing out far enough to comfortablywr

WARNING!• The belt and retractor assembly must be replaced ifthe seat belt assembly Automatic Locking Retractor(ALR) feature or any other seat belt fu

The pretensioners are triggered by the Occupant Re-straint Controller (ORC). Like the air bags, the preten-sioners are single use items. A deployed pr

CAUTION!All occupants, including the driver, should not oper-ate a vehicle or sit in a vehicle’s seat until the headrestraints are placed in their pro

WARNINGS AND CAUTIONSThis Owners Manual contains WARNINGS against op-erating procedures that could result in a collision orbodily injury. It also cont

1. Grasp the deployed AHR from the rear seat.2. Position the hands on the top of the deployed AHR ata comfortable position.3. Pull down then rearward

4. The AHR front soft foam and trim half should lockinto the back decorative plastic half.NOTE:• If you have difficulties or problems resetting the Ac

Enhanced Seat Belt Use Reminder System(BeltAlert®)BeltAlert® is a feature intended to remind the driver andfront passenger (if equipped with front pas

Seat Belts And Pregnant WomenWe recommend that pregnant women use the seat beltsthroughout their pregnancy. Keeping the mother safe isthe best way to

1 — Driver And PassengerAdvanced Front Air Bags3 — Supplemental DriverSide Knee Air Bag/KneeBolster2 — Knee BolsterNOTE: The Driver and Passenger Adva

and rear passengers sitting next to a window. The SABICair bags are located above the side windows and theircovers are also labeled: SRS AIRBAG.This v

Advanced Front Air Bag FeaturesThe Advanced Front Air Bag system has multistagedriver and front passenger air bags. This system providesoutput appropr

Supplemental Seat-Mounted Side Air Bags (SAB)Supplemental Seat-Mounted Side Air Bags (SAB) mayprovide enhanced protection to help protect an occupantd

WARNING!Do not use accessory seat covers or place objectsbetween you and the side air bags; the performancecould be adversely affected and/or objects

• Being too close to the SAB and SABIC air bags duringdeployment could cause you to be severely injured orkilled.The system includes side impact senso

NOTE: It is illegal to remove or alter the VIN.VEHICLE MODIFICATIONS/ALTERATIONSWARNING!Any modifications or alterations to this vehicle couldseriousl

SAB and SABIC air bags are a supplement to the seat beltrestraint system. Occupants, including children who areup against or very close to SAB or SABI

bags, SABs, Supplemental Driver Side Knee Air Bag, andfront seat belt pretensioners, as required, depending onseveral factors, including the severity

position, in the ACC position, or not in the ignition, theair bag system is not on and the air bags will not inflate.The ORC contains a backup power s

are possible, based on several factors, including thecollision type and severity. The steering wheel hub trimcover and the upper right side of the ins

at a very high speed and with such a high force that itcould injure you if you are not seated properly, or if itemsare positioned in the area where th

event the ORC will determine whether to have theEnhanced Accident Response System perform the follow-ing functions:• Cut off fuel to the engine.• Flas

However, if you haven’t healed significantly within afew days, or if you have any blistering, see your doctorimmediately.• As the air bags deflate, yo

Maintaining Your Air Bag SystemWARNING!• Modifications to any part of the air bag systemcould cause it to fail when you need it. You couldbe injured i

Air Bag Warning LightYou will want to have the air bags ready toinflate for your protection in a collision. TheAir Bag Warning Light monitors the inte

• Whether or not the driver and passenger safety beltswere buckled/fastened;• How far (if at all) the driver was depressing theaccelerator and/or brak