Chrysler Sebring Convertible Bedienungshandbuch PDF herunterladen (Seite 162)

100

101

Begin Programming

1. Turn the ignition switch to the ON/RUN position.

2. Hold the battery side of the handheld transmitter

away from the HomeLink威 button you wish to program.

Place the handheld transmitter 1 to 3 in (3 to 8 cm) away

from the HomeLink威 button you wish to program while

keeping the indicator light in view.

3. Simultaneously press and hold both the chosen

HomeLink威 button and the handheld transmitter button

until the HomeLink威 indicator changes from a slow to a

rapidly blinking light, then release both the HomeLink威

and handheld transmitter buttons.

Watch for the HomeLink威 indicator to change flash rates.

When it changes, it is programmed. It may take up to

30 seconds, or longer in rare cases. The garage door may

open and close while you train.

NOTE:

•

Some gate operators and garage door openers may

require you to replace Step 3 with procedures noted in

the “Gate Operator/Canadian Programming” section.

•

After training a HomeLink威 channel, if the garage

door does not operate with HomeLink威 and the ga-

rage door opener was manufactured after 1995, the

garage door opener may have a rolling code. If so,

proceed to Step 5 “Programming A Rolling Code

System.”

4. Press and hold the just-trained HomeLink威 button

and observe the indicator light.

If the indicator light stays on constantly, programming is

complete and the garage door (or device) should activate

when the HomeLink威 button is pressed.

160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 474 475

Kommentare zu diesen Handbüchern

Keine Kommentare

Chrysler Sebring Convertible Bedienungshandbuch Seite 162

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chrysler Sebring Convertible