Chrysler Sebring Convertible 2010 Betriebsanweisung Seite 24

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 78
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 23
The power top switch will operate when the ignition switch is turned to the ON or
ACC position and when in the pow er accessory delay.
Lowering
The power top switch is located on the instrument panel to the left of the steering
column.
The power top switch has two top down positions which affect window position
when lowering the top.
Press and hold the switch halfway down to the first detent position to lower the
top and maintain the current window positions.
Press and hold the switch fully down to the second detent position to lower the
top and completely lower all four windows.
Raising
Press and hold the switch in the top up position until the operation of raising the
top and latching is complete. “TOP DONE” will be displayed in the odometer or
“CONVERTIBLE TOP COMPLETE” in the Electronic Vehicle Information Center once
the convertible top is completely raised and latched.
Continue to hold the switch in the up position to completely raise all four windows.
Emergency Bypass Mode (To Raise The Top Only)
This procedure is only to be used to raise the top when the top cannot be returned
to the UP (raised) position by pressing the POWER TOP switch or is in a position in
which the vehicle cannot be driven. Please follow these emergency bypass
instructions to return the top to the UP (raised) position.
Press the POWER TOP switch in the Top Up direction five times within two seconds
and hold the switch in the Top Up position for a minimum of two minutes.
CAUTION!
Once this procedure has been completed and the top is in the UP (raised)
position, see your authorized dealer. DO NOT exceed 40 mph (64 km/h).
Using the Emergency Bypass Mode could potentially damage the convertible top
and should only be used to raise the power top to the UP (raised) position when
the normal top operation is not functioning.
If damage starts to occur while in the Emergency Bypass Mode, immediately
release the POWER TOP switch and see your authorized dealer.
NOTE: This procedure may take more time to fully raise and close the power top. It
is not uncommon to see delays of up to 30 seconds before operation begins.
OPERATING YOUR VEHICLE
22
Seitenansicht 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare